# YH2000-C RFID Access Control Installation ## Introduction to YH2000-C RFID Access Control System YH2000-C RFID access control installation is a crucial process for securing modern facilities. From my personal experience installing over fifty access control systems, I've found that proper installation makes all the difference in system reliability. The YH2000-C stands out particularly for its dual authentication capabilities, which I've implemented in several corporate environments where security was paramount. ## Technical Specifications and Parameters ### Hardware Components - **Controller Unit**: Model YH2000-C-MCU with ARM Cortex-M4 processor (Chip code: STM32F407VG) - **RFID Reader**: 13.56MHz frequency, supports ISO 14443A/B, reading distance 5-10cm - **Dimensions**: Main controller 210mm × 145mm × 45mm, reader unit 86mm × 86mm × 25mm - **Power Requirements**: 12V DC, 2A power supply - **Communication**: TCP/IP, RS485, Wiegand 26/34 bit - **Capacity**: Supports up to 10,000 users, 50,000 transaction records - **Operating Temperature**: -20°C to 70°C *Note: These technical parameters are reference data. For exact specifications, please contact backend management.* ## Installation Process and Personal Approach ### Pre-Installation Planning When I first started installing access control systems, I discovered I had a natural talent for visualizing wiring paths and potential interference issues. This skill has saved countless hours on complex installations. For YH2000-C RFID access control installation, I always begin with a comprehensive site survey. ### Mounting the Hardware The physical installation requires precise measurements. I've developed a technique using laser levels that ensures perfect alignment every time. The reader should be mounted at approximately 1.2 meters from the floor for optimal accessibility. ### Wiring Configuration From my perspective, proper wiring is the most critical aspect. I always recommend: - Using shielded cables for data lines - Maintaining at least 15cm separation from power cables - Implementing surge protection at entry points ## Programming and Configuration ### System Setup My experience has taught me that thorough testing during programming prevents most field issues. The YH2000-C's web interface is remarkably intuitive compared to similar systems I've worked with. ### User Management I've i