<h1>Cheapest RFID Tags: Balancing Cost and Performance</h1> <p>When sourcing <strong>cheapest RFID tags</strong>, it's crucial to understand that the lowest upfront cost doesn't always translate to the best value. In my experience managing inventory for a mid-sized warehouse, we initially opted for the absolute cheapest UHF tags we could find. The result was frustrating—poor read rates on metal surfaces and a high failure rate after just a few months, costing us more in labor and re-tagging than we saved. This taught me that evaluating tags requires looking at the total cost of ownership, not just the unit price.</p> <h2>Key Factors Influencing the Price of RFID Tags</h2> <p>The cost of an RFID tag is primarily dictated by its type (LF, HF, or UHF), the inlay chip's capabilities, the antenna design, and the encapsulation material. For large-scale asset tracking, UHF tags are often the most cost-effective solution per item.</p> <h3>Technical Specifications for a Typical Low-Cost UHF Inlay</h3> <p>To make an informed decision, here are the detailed technical parameters for a common entry-level UHF RFID inlay. *Note: These technical parameters are for reference only; specifics need to contact backend management.*</p> <h4>Model: TIANJUN-UTag-101 (Passive)</h4> <ul> <li><strong>Chip:</strong> Impinj Monza R6 (or compatible alternative, Chip Code: M-6P)</li> <li><strong>Frequency:</strong> 860-960 MHz (UHF Gen2)</li> <li><strong>Memory:</strong> 96-bit EPC, 64-bit TID, 32-bit User memory</li> <li><strong>Read Range:</strong> Up to 6 meters (dependent on reader and environment)</li> <li><strong>Size:</strong> 90mm x 15mm (thin film antenna)</li> <li><strong>Substrate:</strong> PET (Polyethylene Terephthalate)</li> <li><strong>Application:</strong> General paper/cardboard item tracking, retail apparel</li> </ul> <p>For projects requiring durable tags for harsh environments or specific materials (like metal or liquid containers), <strong>TIANJUN</strong> provides specialized service and products, such as hardened epoxy or ABS plastic housi