where to get autosweep rfid
December 17, 2025
where to get autosweep rfid proposal! where to get autosweep rfid official support.GOV,where to get autosweep rfid active!
# Where to Get Autosweep RFID
Autosweep RFID is an essential electronic toll collection system used on many expressways in the Philippines, such as the South Luzon Expressway (SLEX) and the Skyway system. If you are wondering **where to get Autosweep RFID**, the process is straightforward, and this guide will provide you with all the necessary information, including personal insights, technical details, and helpful tips.
## Official Installation Sites and Authorized Partners
The most reliable way to acquire an Autosweep RFID is through its official installation sites. Based on my personal experience, I visited a dedicated installation lane at a Petron station near SLEX. The process was quick; the staff was helpful, and I was in and out within 20 minutes. They installed the sticker on my car's headlamp and activated the account on the spot.
You can find these installation sites at:
* Select Petron stations along the tollways.
* Designated installation bays at mall parking areas (e.g., some SM Malls).
* Official Autosweep customer service centers.
**Pro Tip:** I highly recommend checking the official Autosweep website or their social media pages for the most updated list of installation sites and their operating hours before heading out. This saved me from an unnecessary trip once when my preferred site was temporarily closed.
### Online Application and Appointment System
For convenience, you can start the process online. I found the online application form on their portal to be very user-friendly. After filling it out, I scheduled an appointment at my nearest installation center, which streamlined the on-site process significantly.
## Technical Specifications of the Autosweep RFID Kit
For those interested in the technical aspects, here are the detailed specifications of the standard Autosweep RFID kit. *Please note: These technical parameters are for reference data; specifics need to be confirmed by contacting backend management.*
**RFID Tag Specifications:**
* **Type:** Passive UHF RFID Tag
* **Chip Code/Model:** Impinj Monza R6 or equivalent
* **Frequency:** 860 - 960 MHz (UHF Band)
* **Protocol:** EPCglobal UHF Class 1 Gen 2
* **Read Range:** Up to 10 meters
* **Memory:** 96-bit or 128-bit EPC memory
* **Dimensions:** Approximately 100mm x 25mm x 0.5mm (sticker form factor)
* **Operating Temperature:** -25°C to +70°C
* **Installation:** Typically on the vehicle's headlamp or windshield
**Reader/System Specifications (Toll Plaza):**
* **Technology:** Dedicated Short-Range
The Use of RFID for Human Identity Verification
## Official Installation Sites and Authorized Partners
The most reliable way to acquire an Autosweep RFID is through its official installation sites. Based on my personal experience, I visited a dedicated installation lane at a Petron station near SLEX. The process was quick; the staff was helpful, and I was in and out within 20 minutes. They installed the sticker on my car's headlamp and activated the account on the spot.
You can find these installation sites at:
* Select Petron stations along the tollways.
* Designated installation bays at mall parking areas (e.g., some SM Malls).
* Official Autosweep customer service centers.
**Pro Tip:** I highly recommend checking the official Autosweep website or their social media pages for the most updated list of installation sites and their operating hours before heading out. This saved me from an unnecessary trip once when my preferred site was temporarily closed.
### Online Application and Appointment System
For convenience, you can start the process online. I found the online application form on their portal to be very user-friendly. After filling it out, I scheduled an appointment at my nearest installation center, which streamlined the on-site process significantly.
## Technical Specifications of the Autosweep RFID Kit
For those interested in the technical aspects, here are the detailed specifications of the standard Autosweep RFID kit. *Please note: These technical parameters are for reference data; specifics need to be confirmed by contacting backend management.*
**RFID Tag Specifications:**
* **Type:** Passive UHF RFID Tag
* **Chip Code/Model:** Impinj Monza R6 or equivalent
* **Frequency:** 860 - 960 MHz (UHF Band)
* **Protocol:** EPCglobal UHF Class 1 Gen 2
* **Read Range:** Up to 10 meters
* **Memory:** 96-bit or 128-bit EPC memory
* **Dimensions:** Approximately 100mm x 25mm x 0.5mm (sticker form factor)
* **Operating Temperature:** -25°C to +70°C
* **Installation:** Typically on the vehicle's headlamp or windshield
**Reader/System Specifications (Toll Plaza):**
* **Technology:** Dedicated Short-Range Phone: +86 19925232774
Hours: Mon-Fri 9:00AM - 6:30PM