<h1>RFID on Number Plate: Revolutionizing Vehicle Identification</h1> <h2>My Journey with RFID Technology</h2> <p><strong>RFID on number plate</strong> systems first caught my attention during a smart city project I consulted on. I was genuinely fascinated by how a simple tag could streamline so many processes. My personal experience has shown that the efficiency gains are not just theoretical; they are tangible and transformative for traffic management and security operations. I've always had a knack for understanding system integrations, and deploying <strong>RFID on number plate</strong> solutions was a perfect case where this skill proved invaluable. In my view, this technology is not a luxury but a necessity for modern urban infrastructure.</p> <h3>Technical Specifications for RFID Number Plate Systems</h3> <p>For those considering implementation, here are detailed technical parameters for a typical UHF <strong>RFID on number plate</strong> solution. The tag is often embedded within or affixed to the plate itself.</p> <h4>Tag Specifications:</h4> <ul> <li><strong>Chip:</strong> Impinj Monza R6-P (Code: EPC C1G2 compliant)</li> <li><strong>Frequency:</strong> 860 - 960 MHz (UHF)</li> <li><strong>Memory:</strong> 96-bit EPC, 64-bit TID, 32-bit User memory</li> <li><strong>Read Range:</strong> Up to 10 meters with appropriate reader</li> <li><strong>Dimensions:</strong> 86mm x 54mm x 0.8mm (Standard credit card size, designed to fit plate backing)</li> <li><strong>Operating Temperature:</strong> -40°C to +85°C</li> <li><strong>Protection Rating:</strong> IP68 (Dust-tight and protected against prolonged immersion)</li> </ul> <h4>Reader/Scanner Specifications:</h4> <ul> <li><strong>Model Example:</strong> Fixed Portal Reader XYZ-9000</li> <li><strong>Interface:</strong> Ethernet (PoE), RS-232</li> <li><strong>Power:</strong> 12-24 V DC or PoE+ (802.3at)</li> <li><strong>Antenna:</strong> Integrated 4x polarized array</li> </ul> <p><em>Note: These technical parameters are for reference data. Specific requirements and custom configurations must be discussed by contacting the backend administration.</e