mifare 1k nfc
December 22, 2025
mifare 1k nfc proposal! mifare 1k nfc official support.GOV,mifare 1k nfc active!
# Mifare 1K NFC: The Classic Contactless Smart Card Technology
## Introduction to Mifare 1K NFC
**Mifare 1K NFC** is one of the most widely deployed contactless smart card technologies globally. From my personal experience working in access control and public transportation sectors, I've seen firsthand how **Mifare 1K NFC** cards have become the backbone of numerous security and payment systems. The reliability and standardized implementation make it a go-to solution for organizations needing robust RFID technology.
## Technical Specifications of Mifare 1K NFC
When implementing **Mifare 1K NFC** solutions, understanding the technical parameters is crucial for system compatibility and performance optimization.
### Memory Structure and Organization
- **Total Memory**: 1 KB EEPROM
- **Memory Organization**: 16 sectors with 4 blocks each
- **Block Size**: 16 bytes (128 bits) per block
- **Sector Structure**: Each sector contains 3 data blocks and 1 sector trailer
- **Unique Identifier (UID)**: 4-byte or 7-byte serial number
### Communication and Performance Parameters
- **Operating Frequency**: 13.56 MHz
- **Data Transfer Rate**: 106 kbit/s
- **Communication Protocol**: ISO/IEC 14443 Type A
- **Operating Distance**: Typically 0-10 cm (depends on reader power and antenna design)
- **Anti-collision**: Supports multiple cards in field simultaneously
### Security Features
- **Authentication**: Mutual three-pass authentication
- **Crypto Algorithm**: Proprietary CRYPTO1 stream cipher
- **Access Conditions**: Configurable via sector trailers
- **Key Storage**: Two 48-bit keys (Key A and Key B) per sector
### Physical Specifications
- **Chip Dimensions**: 2.5 mm × 2.5 mm (typical die size)
- **Chip Code**: NXP MF1 IC S50
- **Operating Voltage**: 3.3V ± 10%
- **Current Consumption**: < 20 mA during operation
- **Temperature Range**: -25°C to +70°C
*Note: These technical parameters are reference data. For exact specifications for your specific application, please contact our backend management team.*
## My Experience with Mifare 1K NFC Implementation
During my tenure as a systems integrator, I discovered a particular talent for troubleshooting **Mifare 1K NFC
The Use of RFID for Human Identity Verification
- **Total Memory**: 1 KB EEPROM
- **Memory Organization**: 16 sectors with 4 blocks each
- **Block Size**: 16 bytes (128 bits) per block
- **Sector Structure**: Each sector contains 3 data blocks and 1 sector trailer
- **Unique Identifier (UID)**: 4-byte or 7-byte serial number
### Communication and Performance Parameters
- **Operating Frequency**: 13.56 MHz
- **Data Transfer Rate**: 106 kbit/s
- **Communication Protocol**: ISO/IEC 14443 Type A
- **Operating Distance**: Typically 0-10 cm (depends on reader power and antenna design)
- **Anti-collision**: Supports multiple cards in field simultaneously
### Security Features
- **Authentication**: Mutual three-pass authentication
- **Crypto Algorithm**: Proprietary CRYPTO1 stream cipher
- **Access Conditions**: Configurable via sector trailers
- **Key Storage**: Two 48-bit keys (Key A and Key B) per sector
### Physical Specifications
- **Chip Dimensions**: 2.5 mm × 2.5 mm (typical die size)
- **Chip Code**: NXP MF1 IC S50
- **Operating Voltage**: 3.3V ± 10%
- **Current Consumption**: < 20 mA during operation
- **Temperature Range**: -25°C to +70°C
*Note: These technical parameters are reference data. For exact specifications for your specific application, please contact our backend management team.*
## My Experience with Mifare 1K NFC Implementation
During my tenure as a systems integrator, I discovered a particular talent for troubleshooting **Mifare 1K NFCPhone: +86 19925232774
Hours: Mon-Fri 9:00AM - 6:30PM