902 928 mhz rfid reader
December 22, 2025
902 928 mhz rfid reader proposal! 902 928 mhz rfid reader official support.GOV,902 928 mhz rfid reader active!
# 902 928 MHz RFID Reader
## Introduction to 902 928 MHz RFID Reader Technology
A 902 928 MHz RFID reader operates within the UHF (Ultra-High Frequency) spectrum, specifically in the 902-928 MHz ISM band, which is widely used for RFID applications in North America and many other regions. This technology enables long-range, high-speed identification and data capture of multiple RFID tags simultaneously. From my personal experience working in logistics and asset management, implementing a UHF RFID system dramatically improved our inventory accuracy and operational efficiency. The ability to scan dozens of pallets or items from several meters away, without direct line-of-sight, felt almost like a superpower—a skill that transformed our warehouse operations.
## Technical Specifications and Detailed Parameters
For professionals considering integration, here are the detailed technical specifications and parameters for a typical high-performance 902 928 MHz RFID reader. **Please note: The following technical parameters are for reference data. For exact specifications, you must contact backend management.**
* **Operating Frequency Range:** 902 - 928 MHz (FCC compliant, Region 2). Can be configured for other regional bands (e.g., 865-868 MHz for EU).
* **Communication Protocol:** Supports EPCglobal UHF Class 1 Gen 2 (ISO 18000-6C) and ISO 18000-6B.
* **Output Power:** Adjustable from 10 dBm to 33 dBm (typical), equivalent to approximately 10 mW to 2W RF power.
* **Read Range:** Up to 15 meters (approx. 50 feet) for passive tags, depending on antenna configuration and environmental conditions.
* **Interface:** Ethernet (10/100/1000 Mbps), RS-232, RS-485, GPIO (4 in / 4 out), USB Host.
* **Power Supply:** 12-24 VDC, typical consumption 15W.
* **Physical Dimensions:** 220mm (L) x 220mm (W) x 45mm (H). Mounting hole pattern: 200mm x 200mm.
* **Operating Temperature:** -20°C to +55°C.
* **Core Processing Chipset:** Often utilizes integrated UHF RFID transceiver chips like the **Impinj R2000** or **Indy R2000 series**, which provide high sensitivity and dense reader mode support.
* **Firmware:** Supports LLRP (Low Level Reader Protocol) and custom embedded applications.
## Applications and Use Cases
### Entertainment Industry Applications
In the entertainment sector, 902 928 MHz RFID
The Use of RFID for Human Identity Verification
A 902 928 MHz RFID reader operates within the UHF (Ultra-High Frequency) spectrum, specifically in the 902-928 MHz ISM band, which is widely used for RFID applications in North America and many other regions. This technology enables long-range, high-speed identification and data capture of multiple RFID tags simultaneously. From my personal experience working in logistics and asset management, implementing a UHF RFID system dramatically improved our inventory accuracy and operational efficiency. The ability to scan dozens of pallets or items from several meters away, without direct line-of-sight, felt almost like a superpower—a skill that transformed our warehouse operations.
## Technical Specifications and Detailed Parameters
For professionals considering integration, here are the detailed technical specifications and parameters for a typical high-performance 902 928 MHz RFID reader. **Please note: The following technical parameters are for reference data. For exact specifications, you must contact backend management.**
* **Operating Frequency Range:** 902 - 928 MHz (FCC compliant, Region 2). Can be configured for other regional bands (e.g., 865-868 MHz for EU).
* **Communication Protocol:** Supports EPCglobal UHF Class 1 Gen 2 (ISO 18000-6C) and ISO 18000-6B.
* **Output Power:** Adjustable from 10 dBm to 33 dBm (typical), equivalent to approximately 10 mW to 2W RF power.
* **Read Range:** Up to 15 meters (approx. 50 feet) for passive tags, depending on antenna configuration and environmental conditions.
* **Interface:** Ethernet (10/100/1000 Mbps), RS-232, RS-485, GPIO (4 in / 4 out), USB Host.
* **Power Supply:** 12-24 VDC, typical consumption 15W.
* **Physical Dimensions:** 220mm (L) x 220mm (W) x 45mm (H). Mounting hole pattern: 200mm x 200mm.
* **Operating Temperature:** -20°C to +55°C.
* **Core Processing Chipset:** Often utilizes integrated UHF RFID transceiver chips like the **Impinj R2000** or **Indy R2000 series**, which provide high sensitivity and dense reader mode support.
* **Firmware:** Supports LLRP (Low Level Reader Protocol) and custom embedded applications.
## Applications and Use Cases
### Entertainment Industry Applications
In the entertainment sector, 902 928 MHz RFIDPhone: +86 19925232774
Hours: Mon-Fri 9:00AM - 6:30PM