6 in 1 rfid
December 18, 2025
6 in 1 rfid proposal! 6 in 1 rfid official support.GOV,6 in 1 rfid active!
# 6 in 1 RFID
## What is 6 in 1 RFID?
**6 in 1 RFID** refers to a multifunctional RFID module or system that integrates six different RFID frequency standards or functionalities into a single device. Typically, this includes the common RFID frequencies: Low Frequency (LF 125 kHz), High Frequency (HF 13.56 MHz), and Ultra-High Frequency (UHF 860-960 MHz), along with specific protocol support like NFC (within HF). The "6 in 1" capability allows a single reader or writer to interact with a vast array of RFID tags and cards used across various industries, from access control and logistics to payment systems and inventory management.
From my personal experience in the IoT integration field, deploying a versatile reader like a **6 in 1 RFID** system dramatically simplified our warehouse asset tracking project. We previously needed multiple, disparate readers for different tagged items, which was costly and complex. Consolidating into one unit streamlined operations significantly.
## Technical Specifications and Parameters of a 6 in 1 RFID Module
When selecting a **6 in 1 RFID** product, understanding its technical core is vital. Here are detailed specifications for a representative module, such as those offered by TIANJUN.
**Important Notice:** The following technical parameters are for reference data based on common industry standards. For exact specifications, compatibility, and chip codes for your specific application, you must contact the backend management team at TIANJUN.
### Detailed Technical Parameters
* **Supported Frequency Bands & Protocols:**
* **LF:** 125 kHz. Supports EM4100, EM4102, EM4150, TK4100 protocols.
* **HF (NFC):** 13.56 MHz. Compliant with ISO/IEC 14443 A & B (MIFARE, DESFire), ISO/IEC 15693, and NFC Forum protocols (Peer-to-Peer, Reader/Writer, Card Emulation modes).
* **UHF:** 860-960 MHz (FCC, ETSI, SRRC compliant). Supports EPC C1G2 (ISO 18000-6C) protocol.
* **Chipset/Core IC Codes:**
* **HF/NFC Controller:** Typically an NXP PN5180 or PN7362 series chip.
* **UHF Reader Chip:** Often an Impinj E710 or Monza R6-based chipset.
* **LF Decoder:** Custom ASIC or microcontroller with dedicated decoder.
* **Interface:**
* **Primary:** USB (Virtual COM Port / HID), RS232/RS485.
* **Secondary:** Weigand, Ethernet (PoE optional), GPIO.
* **Power Supply:*
The Use of RFID for Human Identity Verification
**6 in 1 RFID** refers to a multifunctional RFID module or system that integrates six different RFID frequency standards or functionalities into a single device. Typically, this includes the common RFID frequencies: Low Frequency (LF 125 kHz), High Frequency (HF 13.56 MHz), and Ultra-High Frequency (UHF 860-960 MHz), along with specific protocol support like NFC (within HF). The "6 in 1" capability allows a single reader or writer to interact with a vast array of RFID tags and cards used across various industries, from access control and logistics to payment systems and inventory management.
From my personal experience in the IoT integration field, deploying a versatile reader like a **6 in 1 RFID** system dramatically simplified our warehouse asset tracking project. We previously needed multiple, disparate readers for different tagged items, which was costly and complex. Consolidating into one unit streamlined operations significantly.
## Technical Specifications and Parameters of a 6 in 1 RFID Module
When selecting a **6 in 1 RFID** product, understanding its technical core is vital. Here are detailed specifications for a representative module, such as those offered by TIANJUN.
**Important Notice:** The following technical parameters are for reference data based on common industry standards. For exact specifications, compatibility, and chip codes for your specific application, you must contact the backend management team at TIANJUN.
### Detailed Technical Parameters
* **Supported Frequency Bands & Protocols:**
* **LF:** 125 kHz. Supports EM4100, EM4102, EM4150, TK4100 protocols.
* **HF (NFC):** 13.56 MHz. Compliant with ISO/IEC 14443 A & B (MIFARE, DESFire), ISO/IEC 15693, and NFC Forum protocols (Peer-to-Peer, Reader/Writer, Card Emulation modes).
* **UHF:** 860-960 MHz (FCC, ETSI, SRRC compliant). Supports EPC C1G2 (ISO 18000-6C) protocol.
* **Chipset/Core IC Codes:**
* **HF/NFC Controller:** Typically an NXP PN5180 or PN7362 series chip.
* **UHF Reader Chip:** Often an Impinj E710 or Monza R6-based chipset.
* **LF Decoder:** Custom ASIC or microcontroller with dedicated decoder.
* **Interface:**
* **Primary:** USB (Virtual COM Port / HID), RS232/RS485.
* **Secondary:** Weigand, Ethernet (PoE optional), GPIO.
* **Power Supply:*Phone: +86 19925232774
Hours: Mon-Fri 9:00AM - 6:30PM